PDA

View Full Version : time on the K8 cam



vth0kie12
02-10-2009, 11:22 AM
i put new string on my bow a few weeks back and now i am wondering if i got everything back like it is soppose to be.

what is the correct postion (at rest) on the k8 cam on the synergy. (pic would be good if anyone has them).

i have them timed right, but i was wondering if there were a certain spot where you can get the most out of it. also wondering if this is pretty much the same on all the k8 cam or if it varies from bow to bow.

not sure this make any sense to you guy, but i thought i would ask anyway

archer58inPA
02-10-2009, 11:34 AM
The position at rest doesn't really matter.
If you have tuned it to DL, DW and letoff , the at rest cam position will fall into place.
It is more important to sync. the cams at full draw. The mod stops should be around 1/32'' away from the cables at full draw.

ntypicl11
02-10-2009, 11:54 AM
I have heard that your peak weight should come on at about 6-inches of draw and hold till full draw. No real timing marks, just trial and error. You will have a nice valley when timed correctly.