PDA

View Full Version : Want to verify steps to changing cams on my Elite XLR. Just changing from 29" Rev cam



kevin3vd1
04-07-2009, 01:10 PM
Want to verify steps to changing cams on my Elite XLR. Just changing from 29" Rev cam to a 30" rev cam.
Main questions:
What first?
Do I back limb bolts out first?
How many "FULL" turns can I loosen on the XLR?
When Do I loosen screws on limb pockets ?
Someone fill me in.

I have a bowpress.
I know to keep strings and cables inline( do not untwist etc.)

Thanks,
Kev

cbarber
04-07-2009, 01:14 PM
Want to verify steps to changing cams on my Elite XLR. Just changing from 29" Rev cam to a 30" rev cam.
Main questions:
What first?
Do I back limb bolts out first?
How many "FULL" turns can I loosen on the XLR?
When Do I loosen screws on limb pockets ?
Someone fill me in.

I have a bowpress.
I know to keep strings and cables inline( do not untwist etc.)

Thanks,
Kev

Loosen the screws on the limb bolts first
turn your limb bolts out 3 turns
put in press
remove one side of the eclips on the axles
pull the axles out, but be careful with the spacers in between the cam and limb forks, they are 2 different sizes
do one side at a time
don't forget to put your draw stops back in