PDA

View Full Version : no valley on my Fire, help!



K8hunter
06-21-2010, 10:26 AM
I have had an issue with my fire since I bought it used. There is hardly any valley at full draw. If I barely let up on tension the string wants to jump out of my hand. I have the #1 mods and have the draw stop moved up all the way to the top. I also put on #2 mods to see if anything would change with those. i still wanted to jump out of my hands. Finally, I put on new factory strings from Elite and the problem still persists.

Does anyone have an suggestions? Could the timing be off on the cams? I have lost confidence in the bow for hunting purposes because I am afraid its going to want to jump out of my hands when I am drawn on a deer.

Maybee-R
06-21-2010, 08:24 PM
Yes timing is off. It can be in sync but if its out of time it will have a short valley.
start by syncing the cams at full draw.
Then check Dl and draw weight. on the cable side where the cables hook to the cable post should have a papers width gap. not touching the cable at rest. check and let us know where yours is at. Your welcome to send a Pm if you like.