View Full Version : DW Question

12-12-2011, 02:40 PM
Just got my new to me 2011 Pulse today. It's a 60lb'er. Shoulder has been sore lately, so I cranked the limb bolts all the way down, then backed them out one full turn, which is where it feels fine on my shoulder for now. Just curious what approx. draw weight I am at now.


12-12-2011, 02:52 PM
My Hunter goes about 5 pounds per revolution.

12-12-2011, 02:53 PM
Would it be safe to say that maxed out would be around 62, so I should be around 57?

12-12-2011, 02:53 PM
I would say about 57 lbs.

12-12-2011, 02:57 PM
Thanks guys

12-12-2011, 02:59 PM
Ive had a #60 Pulse down to 52 easily. They usually are 2lbs per turn for me so far. 2 on top and 2 on bottom and youll be down to 52 as well. Make sure you start with them tightened all the way down then go down. Then check the tiller to make sure that is good and you should be ready.

12-12-2011, 03:06 PM
I just started at bottomed out and backed it off a 1/4 turn at a time til it felt okay on my shoulder, and it ended up being exactly one full turn off of max. Just wondering what it was probably on now.

Thanks for the help