Announcement

Announcement Module
Collapse
No announcement yet.

Marks on my fletchings

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Marks on my fletchings

    I've noticed that I have black marks on my fletchings which are coming from my Trophy Taker dropaway rest. Obviously the rest isn't dropping out of the way fast enough. It has almost worn off the felt that covers the fork. It is ever so slight of touching because it has almost taken over a year for the felt to "erode" away and I shoot alot. The marks on the fletchings are not real dark either. I don't want it to touch at all. So do I move the draw cord down the cable further or up slightly. I don't have a drawboard yet.

  • #2
    Up a VERY little..............
    "The Yankee Bowman"
    ----------------------------------------
    '08 LH GT500-65lb Next G1 ​sold
    09 LH Z28-70lb AP sold
    '09 LH Z28-60lb AP sold
    '10 LH XLR-60lb AP Snow sold
    '11 LH Elite Pure-70lb Max 1 sold
    '12 LH Elite Answer-70lb-AP Black ​​sold
    '13 LH Hoyt Procomp Elite XL-60lb- Orange with Black hardware
    '14 LH Hoyt Faktor 34-65lb- AP

    Comment


    • #3
      Your rest needs to be fully up at the last 2 inches of draw. You don't want it to be up longer than that. Set it up this way.

      http://www.trophytaker.com/inserts/a...est_adjust.htm


      The contact may be from the rest bouncing off the shelf and hitting the fletching. That would mean it dropping to soon.

      Comment

      Working...
      X