Announcement

Announcement Module
Collapse
No announcement yet.

Want to verify steps to changing cams on my Elite XLR. Just changing from 29" Rev cam

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Want to verify steps to changing cams on my Elite XLR. Just changing from 29" Rev cam

    Want to verify steps to changing cams on my Elite XLR. Just changing from 29" Rev cam to a 30" rev cam.
    Main questions:
    What first?
    Do I back limb bolts out first?
    How many "FULL" turns can I loosen on the XLR?
    When Do I loosen screws on limb pockets ?
    Someone fill me in.

    I have a bowpress.
    I know to keep strings and cables inline( do not untwist etc.)

    Thanks,
    Kev

  • #2
    Originally posted by kevin3vd1 View Post
    Want to verify steps to changing cams on my Elite XLR. Just changing from 29" Rev cam to a 30" rev cam.
    Main questions:
    What first?
    Do I back limb bolts out first?
    How many "FULL" turns can I loosen on the XLR?
    When Do I loosen screws on limb pockets ?
    Someone fill me in.

    I have a bowpress.
    I know to keep strings and cables inline( do not untwist etc.)

    Thanks,
    Kev
    Loosen the screws on the limb bolts first
    turn your limb bolts out 3 turns
    put in press
    remove one side of the eclips on the axles
    pull the axles out, but be careful with the spacers in between the cam and limb forks, they are 2 different sizes
    do one side at a time
    don't forget to put your draw stops back in
    Precision Archery
    Spicer, Minnesota
    320-796-HUNT
    www.precisionarchery.net

    Comment

    Working...
    X