Announcement

Collapse
No announcement yet.

2011 Elite Pulse No Valley or Letoff

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2011 Elite Pulse No Valley or Letoff

    I recently changed my string on my Pulse & it seems like my bow has no valley & the let-off is almost nothing. Any suggestions as to what I need to do? My draw length seems like it might have shortened a hair, but not by much.
    2011 Elite Pulse 63lbs 29" Victory HV / 336 GR @ 310 FPS
    Firenock Pro Staff, XFire Strings Pro Staff, Honesty Outdoors Pro Staff, BowHuntDelaware Pro Staff
    BowHuntDelaware.com
    BowHuntDelaware.com/Forum

    Ramcat Broadheads!!
    Bowhuntdelaware.com/BowHuntDelawareTest/Broadheads.html

  • #2
    I'm sure you checked to make sure you got your draw stops in the right place???
    Elite J

    Comment


    • #3
      How are you're measurements (ata,bh,poundage)? Have you put it on a draw board? Sounds like you're timing is off. I would guess that you would need to put a couple twists in your cables and maybe take a couple out of your string.

      Comment


      • #4
        Draw stops never moved. I just tried moving them both ways & it didn't make any difference that I felt.
        2011 Elite Pulse 63lbs 29" Victory HV / 336 GR @ 310 FPS
        Firenock Pro Staff, XFire Strings Pro Staff, Honesty Outdoors Pro Staff, BowHuntDelaware Pro Staff
        BowHuntDelaware.com
        BowHuntDelaware.com/Forum

        Ramcat Broadheads!!
        Bowhuntdelaware.com/BowHuntDelawareTest/Broadheads.html

        Comment


        • #5
          ATA is dead on. Brace height is about 1/8" or less over 6". No sure on the poundage - the limbs are 60-70 & I have them backed out exactly 1 & 1/2 turns.
          2011 Elite Pulse 63lbs 29" Victory HV / 336 GR @ 310 FPS
          Firenock Pro Staff, XFire Strings Pro Staff, Honesty Outdoors Pro Staff, BowHuntDelaware Pro Staff
          BowHuntDelaware.com
          BowHuntDelaware.com/Forum

          Ramcat Broadheads!!
          Bowhuntdelaware.com/BowHuntDelawareTest/Broadheads.html

          Comment


          • #6
            I would put it on the draw board and look at your timing. I bet you are off just a little bit.(your timing not you haha.)

            Comment


            • #7
              After changing the string and/or cables you should re tune.
              The string is probably not the same length as the one you took off.
              If you don't have a draw board, take it to a shop that does.
              It's the only way to properly re tune your bow.
              2014 E32
              2011 PULSE AP
              TUNER OF BOWS BY LONG DISTANCE
              Member of the JURY MEMBER OF THE LEFTY BROTHERHOOD




              "If it ain't broke , I can MAKE it better".
              Integrity is doing the right thing when no one is looking.

              Comment

              Working...
              X