Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: I have a question

  1. #1
    Senior Member Eight Point COWBOY's Avatar
    Join Date
    Aug 2008
    Location
    Montana
    Posts
    510

    Default I have a question

    On the SBH energy how did the DL run? Long, short or right on. Considering your answers Which mod would I need to acheive 28". also what kind of speed could I excpect from that length (IBO) Thanks for your help
    Last edited by COWBOY; 01-29-2010 at 10:54 PM. Reason: sp

  2. #2
    Moderator Ultramax's Avatar
    Join Date
    Nov 2007
    Location
    Columbia, Missouri
    Posts
    1,993

    Default

    Quote Originally Posted by COWBOY View Post
    On the SBH energy how did the DL run? Long, short or right on. Considering your answers Which mod would I need to acheive 28". also what kind of speed could I excpect from that length (IBO) Thanks for you help
    Those ran about 1/2" long. the mods you need for that DL are S8. Mine with S9 mods shot 297fps grained out.
    2011 Pulse Snow/AT
    2010 Judge Snow Camo

  3. #3
    Respected Member Ten Point Stag TEXAS 10PT's Avatar
    Join Date
    Nov 2007
    Location
    Great State of Texas
    Posts
    12,602

    Default

    I have #5 500 mods on mine and they run 3/16" long on the draw for 29 3/16" If I recall correctly I was getting 294-296fps with a 405gr arrow at 29/70.
    A #7 500 mod is for 28" but I would imagine it will run a little long like mine do. Remember the SBH Energy's draw started at 31" so every mod is different than a bow that starts at 30" like the E-500. A #6 mod is normally 27" but on a SBH it is 28". I've never tried an EZ or S mod on these bows, only 500 mods. IBO for your draw I'm thinking around 300-303fps with 500 mods.

    Fixed another post of mine dangit!!!

    TEXAS
    Last edited by TEXAS 10PT; 01-29-2010 at 11:18 PM.
    2011 PURE MAX 1
    2014 ENERGY 35 XTRA
    Elite Archery Pro Staff


    Proud Member of the Texas Boys
    BH and HTC Nashville

  4. #4
    Respected Member Ten Point Stag
    Join Date
    Jan 2009
    Posts
    3,312

    Default

    I have 27.5" speed mods for the SBH Energy I believe. They are green. I can check to make sure I have them if you'd like.

    I think I got 27.5", 28, and both 28.5" module sets with my SBH Energy.

  5. #5
    Moderator Ultramax's Avatar
    Join Date
    Nov 2007
    Location
    Columbia, Missouri
    Posts
    1,993

    Default

    Quote Originally Posted by TEXAS 10PT View Post
    I have #5 500 mods on mine and they run 3/16" long on the draw for 29 3/16" If I recall correctly I was getting 294-296fps with a 405gr arrow at 29/70.
    A #6 500 mod is for 28" but I would imagine it will run a little long like mine do. Remember the SBH Energy's draw started at 31" so every mod is different than a bow that starts at 30" like the E-500. A #6 mod is normally 27" but on a SBH it is 28". I've never tried an EZ or S mod on these bows, only 500 mods. IBO for your draw I'm thinking around 300-303fps with 500 mods.

    TEXAS
    Texas, If a 31" mod is a Number 1 then a 30" would be #3 a 29" would be #5 a 28" would be #7 and a 27" would be #9 right. My Short BH Energy had #9 mods on it and was a 27" draw. With him needing 28" I would put a #8 (27.5")mod on there which would run 3/8-1/2" long and put him right at 28" DL.
    2011 Pulse Snow/AT
    2010 Judge Snow Camo

  6. #6
    Senior Member Eight Point COWBOY's Avatar
    Join Date
    Aug 2008
    Location
    Montana
    Posts
    510

    Default

    Quote Originally Posted by TEXAS 10PT View Post
    I have #5 500 mods on mine and they run 3/16" long on the draw for 29 3/16" If I recall correctly I was getting 294-296fps with a 405gr arrow at 29/70.
    A #6 500 mod is for 28" but I would imagine it will run a little long like mine do. Remember the SBH Energy's draw started at 31" so every mod is different than a bow that starts at 30" like the E-500. A #6 mod is normally 27" but on a SBH it is 28". I've never tried an EZ or S mod on these bows, only 500 mods. IBO for your draw I'm thinking around 300-303fps with 500 mods.

    TEXAS
    Thanks, There is one for sale on AT that has a #5 ez as I see it that should be 29? How difficult is it to come by mods?

  7. #7
    Respected Member Ten Point Stag TEXAS 10PT's Avatar
    Join Date
    Nov 2007
    Location
    Great State of Texas
    Posts
    12,602

    Default

    Quote Originally Posted by Ultramax View Post
    Texas, If a 31" mod is a Number 1 then a 30" would be #3 a 29" would be #5 a 28" would be #7 and a 27" would be #9 right. My Short BH Energy had #9 mods on it and was a 27" draw. With him needing 28" I would put a #8 (27.5")mod on there which would run 3/8-1/5" long and put him right at 28" DL.
    Yep its a #7 and not a #6....I'm getting old!!!! LOLOL Both of mine only run 3/16" long which is very manageable. Funny thing is these same mods on an E-500 run an inch long...go figure. If I had a set of #7 500 mods I would send them to Cowboy to try. I wish I had another set of 06 updated cams. Smoother draw than the originals (IMO) and same speed.

    TEXAS
    2011 PURE MAX 1
    2014 ENERGY 35 XTRA
    Elite Archery Pro Staff


    Proud Member of the Texas Boys
    BH and HTC Nashville

  8. #8
    Respected Member Ten Point Stag TEXAS 10PT's Avatar
    Join Date
    Nov 2007
    Location
    Great State of Texas
    Posts
    12,602

    Default

    Quote Originally Posted by COWBOY View Post
    Thanks, There is one for sale on AT that has a #5 ez as I see it that should be 29? How difficult is it to come by mods?
    The mods are around. I have alot of #3-5 mods but nothing that would fit you bro or I would help you out. I think Elite still has a few. Maybe nobby16. I think he is or used to be a dealer.

    TEXAS
    2011 PURE MAX 1
    2014 ENERGY 35 XTRA
    Elite Archery Pro Staff


    Proud Member of the Texas Boys
    BH and HTC Nashville

  9. #9
    Respected Member Ten Point Stag
    Join Date
    Jan 2009
    Posts
    3,312

    Default

    http://www.archerytalk.com/vb/showthread.php?t=1099549

    Here is the link to the bow I bought and the mods I have. I would be willing to part with the 27.5" speed mods, which are green, if you can live with that.

    I did not get the EZ 27.5" mods, the seller kept them.

  10. #10
    Respected Member Ten Point Stag TEXAS 10PT's Avatar
    Join Date
    Nov 2007
    Location
    Great State of Texas
    Posts
    12,602

    Default

    Quote Originally Posted by tomkat04 View Post
    http://www.archerytalk.com/vb/showthread.php?t=1099549

    Here is the link to the bow I bought and the mods I have. I would be willing to part with the 27.5" speed mods, which are green, if you can live with that.

    I did not get the EZ 27.5" mods, the seller kept them.
    Green colored speed mods were the originals. Kevin colored them so there wasn't any confusion. EZ-black, S-green, 500-silver they didn't keep up with the color though. Eventually the EZ and Speed were all black but the 500 stayed silver.

    TEXAS
    2011 PURE MAX 1
    2014 ENERGY 35 XTRA
    Elite Archery Pro Staff


    Proud Member of the Texas Boys
    BH and HTC Nashville

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •