Results 1 to 7 of 7

Thread: 2011 Elite Pulse No Valley or Letoff

  1. #1
    Senior Member Forked Horn stkline81's Avatar
    Join Date
    Apr 2011
    Location
    Clayton, DE
    Posts
    170

    Default 2011 Elite Pulse No Valley or Letoff

    I recently changed my string on my Pulse & it seems like my bow has no valley & the let-off is almost nothing. Any suggestions as to what I need to do? My draw length seems like it might have shortened a hair, but not by much.
    2011 Elite Pulse 63lbs 29" Victory HV / 336 GR @ 310 FPS
    Firenock Pro Staff, XFire Strings Pro Staff, Honesty Outdoors Pro Staff, BowHuntDelaware Pro Staff
    BowHuntDelaware.com
    BowHuntDelaware.com/Forum

    Ramcat Broadheads!!
    Bowhuntdelaware.com/BowHuntDelawareTest/Broadheads.html

  2. #2
    Senior Member Four Point elitej's Avatar
    Join Date
    Sep 2008
    Posts
    213

    Default

    I'm sure you checked to make sure you got your draw stops in the right place???
    Elite J

  3. #3
    Senior Member Forked Horn gamehog1's Avatar
    Join Date
    Jul 2011
    Location
    Great Falls ,Mt
    Posts
    166

    Default

    How are you're measurements (ata,bh,poundage)? Have you put it on a draw board? Sounds like you're timing is off. I would guess that you would need to put a couple twists in your cables and maybe take a couple out of your string.

  4. #4
    Senior Member Forked Horn stkline81's Avatar
    Join Date
    Apr 2011
    Location
    Clayton, DE
    Posts
    170

    Default

    Draw stops never moved. I just tried moving them both ways & it didn't make any difference that I felt.
    2011 Elite Pulse 63lbs 29" Victory HV / 336 GR @ 310 FPS
    Firenock Pro Staff, XFire Strings Pro Staff, Honesty Outdoors Pro Staff, BowHuntDelaware Pro Staff
    BowHuntDelaware.com
    BowHuntDelaware.com/Forum

    Ramcat Broadheads!!
    Bowhuntdelaware.com/BowHuntDelawareTest/Broadheads.html

  5. #5
    Senior Member Forked Horn stkline81's Avatar
    Join Date
    Apr 2011
    Location
    Clayton, DE
    Posts
    170

    Default

    ATA is dead on. Brace height is about 1/8" or less over 6". No sure on the poundage - the limbs are 60-70 & I have them backed out exactly 1 & 1/2 turns.
    2011 Elite Pulse 63lbs 29" Victory HV / 336 GR @ 310 FPS
    Firenock Pro Staff, XFire Strings Pro Staff, Honesty Outdoors Pro Staff, BowHuntDelaware Pro Staff
    BowHuntDelaware.com
    BowHuntDelaware.com/Forum

    Ramcat Broadheads!!
    Bowhuntdelaware.com/BowHuntDelawareTest/Broadheads.html

  6. #6
    Senior Member Forked Horn gamehog1's Avatar
    Join Date
    Jul 2011
    Location
    Great Falls ,Mt
    Posts
    166

    Default

    I would put it on the draw board and look at your timing. I bet you are off just a little bit.(your timing not you haha.)

  7. #7
    Respected Member Ten Point Stag archer58inPA's Avatar
    Join Date
    Jan 2008
    Location
    DU BIOS,PA
    Posts
    7,482

    Default

    After changing the string and/or cables you should re tune.
    The string is probably not the same length as the one you took off.
    If you don't have a draw board, take it to a shop that does.
    It's the only way to properly re tune your bow.
    2014 E32
    2011 PULSE AP
    TUNER OF BOWS BY LONG DISTANCE
    Member of the JURY MEMBER OF THE LEFTY BROTHERHOOD




    "If it ain't broke , I can MAKE it better".
    Integrity is doing the right thing when no one is looking.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •